Posted: February 1st, 2024

Perform a general analysis of this dataset – Database Management System

Perform a general analysis of this dataset – Database Management System

Task 1 –

Preface: The analysis of results from urban mobility simulations provide very valuable data for the identification and addressing of problems in an urban road network. Public transport vehicles such as busses and taxis are often equipped with GPS location devices and the location data is submitted to a central server for analysis.

The metropolitan city of Rome, Italy collected location data from 320 taxi drivers that work in the center of Rome. Data was collected during the period from 01/Feb/2014 until 02/March/2014. An extract of the dataset is found in taxi.csv. The dataset contains 4 attributes:

1. ID of a taxi driver. This is a unique numeric ID.

2. Date and time in the format Y:m:d H:m:s.msec+tz, where msec is micro-seconds, and tz is a time-zone adjustment. (You may have to change the format of the date into one that R can understand).

3. Latitude

4. Longitude

For a further description of this dataset: http://crawdad.org/roma/taxi/20140717/

Purpose of this task: Perform a general analysis of this dataset. Learn to work with large datasets. Obtain general information of the behaviour of some taxi drivers. Analyse and interpret results. This task also serves as a preparation for a project that will be based on this dataset.

Questions: By using the data in taxi.csv perform the following tasks:

(a) Plot the location points (2D plot), clearly indicate the points that are outliers or noise points. The plot should be informative! Remove outliers and noise points before answering the subsequent sub-questions. Write my Essay Online Writing Service with Professional Essay Writers – Explain reasons to why you defined the removed points as noise points.

(b) Compute the minimum, maximum, and mean location values.

(c) Obtain the most active, least active, and average activity of the taxi drivers (most time driven, least time driven, and mean time driven)

(d) Look at the file Student_Taxi_Mapping.txt. The file contains two columns. The first column is a 4- digit student code, the 2nd column is the ID of a taxi driver. Use the first and last three digits of your student number, locate that number in the first column of the file Student_Taxi_Mapping.txt then use the ID of the taxi driver listed in column 2. Thus, for example, if your student number is 52345678 then you would look up 5678 in file Student_Taxi_Mapping.txt to find that the corresponding taxi ID is 50. Use the taxi ID that matches your 4-digit student code to answer the following questions:

i. Plot the location points of taxi=ID

ii. Compare the mean, min, and max location value of taxi=ID with the global mean, min, and max.

iii. Compare total time driven by taxi=ID with the global mean, min, and max values.

iv. Compute the distance traveled by taxi=ID. To compute the distance between two points on the surface of the earth use the following method:

dlon = lon2 ­ lon1

dlat = lat2 ­ lat1

a = (sin(dlat/2))^2 + cos(lat1) * cos(lat2) * (sin(dlon/2))^2

c = 2 * atan2( sqrt(a), sqrt(1­a))

distance = R * c (where R is the radius of the Earth)

Assume that R=6,371,000 meters.

Task 2 –

Preface: Banks are often posed with a problem to whether or nor a client is credit worthy. Banks commonly employ data mining techniques to classify a customer into risk categories such as category A (highest rating) or category C (lowest rating).

A bank collects data from past credit assessments. The file creditworthiness.csv contains 2500 of such assessments. Each assessment lists 46 attributes of a customer. The last attribute (the 47-th attribute) is the result of the assessment. Open the file and study its contents. You will notice that the columns are coded by numeric values. The meaning of these values is defined in the file definitions.txt. For example, a value 3 in the 47-th column means that the customer credit worthiness is rated “C”. Any value of attributes not listed in definitions.txt is “as is”.

This poses a “prediction” problem. A machine is to learn from the outcomes of past assessments and, once the machine has been trained, to assess any customer who has not yet been assessed. For example, the value 0 in column 47 indicates that this customer has not yet been assessed.

Purpose of this task:

You are to start with an analysis if the general properties of this dataset by using visualization and clustering techniques (i.e. Such as those introduced during the lectures), and you are to obtain an insight into the degree of difficulty of this prediction task. Then you are to design and deploy an appropriate supervised prediction model (i.e. MLP as will be used in the lab of week 5) to obtain a prediction of customer ratings.

Question 1: Analyse the general properties of the dataset and obtain an insight into the difficulty of the prediction task. Create a statistical analysis of the attributes, then list 5 of the most interesting (or most valuable) attributes. Write my Essay Online Writing Service with Professional Essay Writers – Explain the reasons that make these attributes interesting. Note A set of R-script files are provided with this assignment (included in the zip-file). These are similar to the scripts used in lab1. The scripts provided will allow you to produce some first results. However, virtually none of the parameters used in these scripts are suitable for obtaining a good insight into the general properties of the given dataset. Hence your task is to modify the scripts such that informative results are obtained from which conclusions about the learning problem can be made. Note that finding a good set of parameters is often very time consuming in data mining.

An additional challange is to make a correct interpretation of the results.

This is what you need to do: Find a good set of parameters (i.e. Through a trial and error approach), obtain informative results then offer an interpretation of the results. Write down your approach to conducting the experiments, explain your results, and offer a comprehensive interpretation of the results. Do not forget that you are also to provide an insight into the degree of difficulty of this learning problem (i.e. From the results that you obtained, can it be expected that a prediction model will be able to obtain 100% prediction accuracy?). Always explain your answers.

Question 2: Deploy a prediction model to predict the credit worthiness of customers which have not yet been assessed. The prediction capabilities of the MLP in lab4 was very poor. Your task is to:

a) Describe a valid strategy that maximises the accuracy of predicting the credit rating. Write my Essay Online Writing Service with Professional Essay Writers – Explain why your strategy can be expected to maximize the prediction capabilities.

b) Use your strategy to train MLP(s) then report your results. Give an interpretation of your results.

What is the best classification accuracy (expressed in % of correctly classified data) that you can obtain for data that were not used during training (i.e. The test set)?

http://teaching.cs.uow.edu.au/~markus/data/taxi.csv.zip

Order | Check Discount

Tags: Best Research Paper Topics for Examples, Dissertation App, Dissertation Topics for Students in, I need help writing a doctoral thesis online, I need help writing a page paper assignment